| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Dupli-carver http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=3821 |
Page 1 of 1 |
| Author: | Max Devon [ Wed Nov 16, 2005 3:06 pm ] |
| Post subject: | |
Howdy, I am wondering if any one here is using a duplicarver (for making Mandolins and Archtops). Does any one have recommendations or thoughts on any of the various brands (such as the Multicarver)?? -Max |
|
| Author: | Dale M [ Wed Nov 16, 2005 11:07 pm ] |
| Post subject: | |
Max, I`m using a home made duplicator built by a friend of mine now. I`m building a Benedetto style arch top. I had a duplicator at one time when I was teaching , however I was not very happy with it. I can`t remember the brand unfortunately. I wish I could send pics of this machine but I`m too dumb to post pics on the web site. It is very simple and works better than the factory made I had axcess to before. It is extremly rigid and heavy and will faithfully trace the three axis necessary to form a top. |
|
| Author: | csullivan [ Thu Nov 17, 2005 12:13 am ] |
| Post subject: | |
If you have any pics maybe someone here could walk you through posting them, because it sounds like you have a system that works well. I sure would like to see it. Craig |
|
| Author: | Brock Poling [ Thu Nov 17, 2005 5:51 am ] |
| Post subject: | |
If you have them digitally, just email them to me... I will post them for you. bpoling AT atomic-mail DOT com |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|